Once upon a time, the Wattage of a light bulb was used as a universal indicator of its brightness and nobody even knew what was a lumen. A 60 Watts light bulb, for example, would always be brighter than a 40W. This made it easy to find replacement light bulbs of equal brightness.
For a long time, this was fine. But then, the emergence of energy-saving lighting – in particular, LED light bulbs – threw a spanner in the works.
Well, the energy efficiency of these new light bulbs meant that a higher Wattage no longer meant a brighter light. A 10W LED bulb, for example, would be much brighter than a traditional 40W light bulb.
When LED lighting first emerged, the amount of energy consumed vs light output wasn’t explained particularly well to consumers, so buying replacement light bulbs often became a frustrating, confusing affair.
The good news is that there is another easy way to tell if one light bulb is brighter than another.
The answer lies in lumens.
What is a lumen?
It turns out that Wattage was never the most accurate way to determine the brightness of a light bulb. This is because it denotes the power input to a light bulb, rather than its light output (which is what we’re really looking for).
Instead, we need to pay attention to what is a lumen measurement.
Lumens (lm) is the unit of luminous flux; that is – a measure of the amount of visible light that the human eye can detect from a lamp or light source.
The higher the lumen rating, the brighter the lamp will appear. A typical household light bulb might emit anything between 300–1000 lumens, while a high-powered floodlight could emit in excess of 20,000 lumens.
The best thing about using lumens to determine the light emitted is that it works the same way no matter what type of light bulb you’re looking at. When comparing an LED light bulb with a halogen light bulb, for example, the brighter light bulb is always the one with the higher lumens count.
All lighting products should have the level of brightness stated as lumens (as well as their Wattage) on their packaging, and on their online product listings, where applicable.
It can be confusing to understand the Wattage of a particular technology and how that relates to an old-fashioned 60W incandescent light bulb (for example).
We have provided a handy table below to help you find the equivalent wattage between incandescent bulbs and the other more energy efficient lighting technologies.
Do Watts still matter?
Wattage alone may no longer tell you how bright a light source is, but it is still an important measure in other respects.
Dimmer switches, for example, can only handle light bulbs up to a certain Wattage (specified by the manufacturer), and it is important for safety reasons that this is not exceeded. It may not surprise you that the development of LED lighting has complicated this too (luckily, we also have a easy to use dimming guide to help with that).
Using Watts and lumens together, though, we can determine how energy efficient a light bulb is.
Calculating lumens per Watt
So far, we’ve been talking as if a brighter light bulb is a better light bulb, but this is only half the story.
What we really want is a light bulb that has the correct brightness for our intended use, but which uses only a minimal amount of power. This is where we can start talking about the energy efficiency of a light source.
We already know that higher lumens equal a brighter light bulb, and lower Wattage equals less power.
It therefore makes sense that a bulb with a high lumens count and a low Wattage rating is going to be more energy-efficient than another bulb with a low lumens count and a higher Wattage.
To put it simply, to determine a light bulb’s energy efficiency, we need to know how many lumens it outputs for every Watt (or the lumen per Watt value).
This isn’t difficult, as we already have all the information we need. As an easy example, we’ll work this out using a 10 Watt bulb that emits 1000 lumens.
All we need to do is divide the number of lumens (1000lm) by the number of Watts (10W):
1000 / 10 = 100 lumens per Watt (lm/w).
Once we’ve worked this out, it is easy to compare the energy efficiency of different light bulbs, irrespective of their type. It works whether you’re comparing an LED with an incandescent, or a halogen with a compact fluorescent, and so on. It means that we now have an easy way to tell which bulb is the most efficient and therefore, which is best.
As a side note, it is not worth us trying to say what a ‘good’ lumens-per-Watt number is, as the development of lighting technology these days means that it is improving at a rapid rate. What seems like unbeatable energy efficiency right now might just be the standard months down the line.
Now that you know exactly what you’re looking for, you might find that there can be quite a difference between light bulbs that otherwise look the same. One LED 10W bulb might be much more efficient than another LED 10W bulb and, conversely, a particular LED 8W bulb might not actually be as efficient as LED 6W bulb with similar lumen output.
By using this simple calculation, you will be well on the way to finding the best, most energy efficient and brightest light bulbs.